Renault Megane, Scenic

Since 1996 of release

Repair and car operation



Reno Megan, Stsenik
+ Cars of mark Renault Megane
+ Maintenance service
+ Engine repair
+ System of cooling, heating
- Power supply systems, release
   + Fuel and an exhaust system - petrol models
   - Fuel and exhaust systems - diesel models
      Removal and installation of a casing of the air filter
      Removal and installation of the gauge of a stock of fuel
      Removal and installation of a fuel tank
      Removal, installation and adjustment of a rope of gas
      Removal and installation of a pedal of gas
      Pouring and prorolling of fuel system
      Check and adjustment of the maximum turns of the engine
      Removal, installation, check and adjustment of a thermodrive and rope of fast idling
      Removal, installation, check and adjustment of components of system of fast idling
      Check, removal and installation of the proof-reader of the moment of injection at cold start
      The description, removal and valve installation отсечки fuel
      Removal and installation of the gauge of temperature of fuel
      Removal and installation of the fuel pump
      Methods of check and adjustment of the moment of injection
      Check and adjustment of the moment of injection
      Check, removal and installation of atomizers
      Removal and installation of the inlet pipeline and final collector
      Check and adjustment of turns of idling and delay turns
      turbocharger - the description and precautions
      Removal and installation турбокомпрессора
      Survey and service турбокомпрессора
      Removal and installation интеркулера (models with turbocharger)
      The general description and replacement of components of final system
   + Systems of decrease in toxicity of the fulfilled gases
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Electric equipment schemes
3bf7a351




Removal and installation of a fuel tank

 REMOVAL

1. Before removal of a fuel tank it is necessary to remove all fuel from it.
2. Disconnect a cable of weight from the battery (address to the Head an engine Electric equipment).

If the autoradio tape recorder in your car is coded before to disconnect the battery, be convinced that you know a code.

3. Remove a back seat or a pillow of a back seat as it is described in the Head the Body to get access to a cover of the gauge of a stock of fuel.
4. By means of a screw-driver accurately uncover to get access to the pump.
5. If in a fuel tank there was a fuel, it can be removed, having removed the gauge of a stock of fuel as Removal and installation of the gauge of a stock of fuel is described in Section, and having pumped out fuel from a tank.
6. Disconnect a socket of electroconducting from the gauge of a stock of fuel and attach it to a car body.
7. Disconnect submitting and returnable hoses, address to Section Removal and installation of the gauge of a stock of fuel.
8. Block forward wheels, then поддомкратьте a back part of the car and establish on axial props. Remove the right back wheel.
9. Remove an exhaust system and теплоизоляционный a board, address to Section the General description and replacement of components of final system.
10. Notice position of an adjusting nut on a back part of a core of the equalizer of a manual brake, then turn on and remove it and separate ropes of a manual brake from holders on the bottom. Displace ropes from a fuel tank.
11. Disconnect hoses from a bulk mouth of a fuel tank.
12. Prop up a tank a jack, having laid between them a board piece.
13. Turn on and remove fixing bolts, then slowly lower a fuel tank, disconnecting all tubes which become accessible, and remove a tank from under the car. Pay attention that probably it is necessary to bend accurately brake tubes to provide a sufficient backlash at tank lowering.
14. If in a tank the deposit or water have accumulated, remove the gauge of a stock of fuel (Has undressed Removal and installation of the gauge of a stock of fuel) and wash out a tank pure fuel. The tank is made of a synthetic material and if it is seriously damaged, it is necessary to replace it. Small leaks sometimes can be eliminated. Address for council to the expert.


 INSTALLATION

1. Make installation in the return to removal an order, paying attention to the following:
a) At tank lifting back into position watch that between a tank and a car body hoses were not jammed.
b) Be convinced that all tubes and hoses are correctly laid.
In summary, fill a tank with a small amount of fuel and check up on leak signs.