Reno Megan, Stsenik
+ Cars of mark Renault Megane
+ Maintenance service
+ Engine repair
+ System of cooling, heating
- Power supply systems, release
+ Fuel and an exhaust system - petrol models
- Fuel and exhaust systems - diesel models
Removal and installation of a casing of the air filter
Removal and installation of the gauge of a stock of fuel
Removal and installation of a fuel tank
Removal, installation and adjustment of a rope of gas
Removal and installation of a pedal of gas
Pouring and prorolling of fuel system
Check and adjustment of the maximum turns of the engine
Removal, installation, check and adjustment of a thermodrive and rope of fast idling
Removal, installation, check and adjustment of components of system of fast idling
Check, removal and installation of the proof-reader of the moment of injection at cold start
The description, removal and valve installation отсечки fuel
Removal and installation of the gauge of temperature of fuel
Removal and installation of the fuel pump
Methods of check and adjustment of the moment of injection
Check and adjustment of the moment of injection
Check, removal and installation of atomizers
Removal and installation of the inlet pipeline and final collector
Check and adjustment of turns of idling and delay turns
turbocharger - the description and precautions
Removal and installation турбокомпрессора
Survey and service турбокомпрессора
Removal and installation интеркулера (models with turbocharger)
The general description and replacement of components of final system
+ Systems of decrease in toxicity of the fulfilled gases
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Electric equipment schemes
|
Removal and installation of a casing of the air filter
MODELS WITHOUT ТУРБОКОМПРЕССОРА
|
|
|
1. Turn away fastening screws (one of screws is in the cover centre) and uncover the air filter.
2. Take filtering element from the filter case.
3. Disconnect an air hose of the inlet pipeline from the case of the air filter.
4. Disconnect an air hose in the basis of the case of the air filter and in a forward left corner of an impellent compartment.
5. Turn away fixing nuts and remove the case of the air filter from an arm in an impellent compartment. If it is necessary, turn away an entrance air line from a forward cross-beam, and also turn away an arm.
6. Check up a condition of rubber pillows and replace them as required. Also check up a condition of hoses and collars. |
|
|
|
|
1. Make installation in return sequence. |
|
MODELS WITH ТУРБОКОМПРЕССОРОМ
|
|
|
1. Turn away screws and uncover the air filter.
2. Take filtering element of the case of the air filter.
3. Let out a belt, крепящий the case of the air filter to an arm.
4. Disconnect an air line connecting the case of the air filter with turbocharger.
5. Disconnect an air hose from the basis of the air filter and remove the case of the air filter from an arm.
6. If it is necessary, turn away an entrance air line from a forward cross-beam, and also turn away an arm.
7. Check up a condition of a belt of fastening, hoses and collars. |
|
|
|
|
1. Make installation in return sequence. |
|
|
|
