|
1. Интеркулер settles down on a left-hand side of an impellent compartment, behind a forward bumper.
2. Remove a forward bumper as it is described in the Head the Body.
|
|
3. Loosen the fixing clips, also disconnect the channel connecting интеркулер with turbocharger and the inlet pipeline (address to an accompanying illustration). |
|
|
4. Working outside of the wing panel, turn away two bolts, fastening an arm интеркулер to the body panel. Where it is applied, remove also a fixing nut of an arm (address to an accompanying illustration). |
5. Working on an inside интеркулера, turn away a bolt, крепящий a tightening lath to the body panel, and get a tightening lath.
6. Push интеркулер upwards to release top fixing скобу from a sealing edge of the panel of a body (скоба it is visible from an impellent compartment), then get интеркулер with an arm from under the car.
7. Интеркулер it is possible to remove from an arm, having turned away two bolts of fastening and having removed the bottom part of an arm. |
