1. Disconnect a cable of weight from the battery (address to the Head an engine Electric equipment).
If the autoradio tape recorder in your car is coded before to disconnect the battery, be convinced that you know a code.
2. Remove a radiator as it is described in the Head System of cooling, heating.
3. Merge трансмиссионную a liquid as Maintenance service is described in the Head.
4. If it is necessary, merge impellent oil.
5. Remove a cowl as it is described in the Head the Body.
6. Cock a manual brake, then поддомкратьте a forward part of the car and establish it on axial props. Remove both lobbies of a wheel. Where is available, remove the bottom guard of the engine.
7. Remove loose leaves of arches of forward wheels.
8. Turn away cores, fastening a stretcher to a body, from each party of the car.
9. Turn away supports of a forward brake from rotary fists as it is described in the Head Brake system, and tie up them to a body.
10. On models with ABS, turn away gauges of speed of rotation of a wheel and remove them from rotary fists.
11. Remove a forward bumper as it is described in the Head the Body.
12. Remove a reception pipe and каталитический the converter, operating according to the description in the Head of the Power supply system and release.
13. Remove a sound signal as the Onboard electric equipment is described in the Head.
14. Remove assemblage of the air filter as it is described in the Head of the Power supply system and release.
15. Turn away a cable of weight from a partition.
16. Disconnect a hose of the gauge of pressure in the pipeline from the inlet pipeline and disconnect electroconducting from the gauge.
17. Remove a broad tank and attach it to engine/transmission assemblage.
18. Disconnect a rope of a pedal of gas from the throttle case.
19. Disconnect electroconducting from the mechanism of inclusion of a hill-climbing gear.
20. Disconnect a hose of the block of the vacuum amplifier of brakes from the inlet pipeline.
21. Remove the top and lateral covers from the relay block on a left-hand side of an impellent compartment, then release a payment of the relay and a coupler of conducting and move electroconducting on the engine.
22. Disconnect electroconducting from the block of management of automatic transmission on a left-hand side of an impellent compartment.
23. Disconnect a hose of a coal adsorber from the electromagnetic valve on the inlet pipeline.
24. Disconnect a power cable of a food of a starter from the accumulator. For this purpose, remove the accumulator (the Head an engine Electric equipment) and disconnect electroconducting, then release a cable from a cover / a sealing ring in the panel of a partition of impellent branch. Also disconnect feeding wire of system of injection of fuel.
25. Loosen the скобы also disconnect submitting and returnable fuel hoses from a fuel highway.
26. Disconnect hoses of a heater from a thermostat casing.
27. Disconnect management of the mechanism of a choice of transfer from transmission (address to the Head Transmission).
28. Remove auxiliary приводной a belt (address to the Head Maintenance service).
29. Remove a pulley from the pump of a steering with the amplifier as it is described in the Head the Suspension bracket and a steering.
30. Turn away three fixing bolts of the pump of a steering with the amplifier and where it is applied, four fixing bolts of the compressor of a central air of air. Displace the pump and the compressor aside, but do not disconnect a tube.
31. Release a tube of low pressure of a central air of air from the bottom fastening of the engine/transmission.
32. Remove the left support of the engine/transmission. But at first insert a wooden wedge between transmission and a stretcher left-hand side to support transmission weight. On engines K7M, ослабьте a nut of the bottom fastening from a stretcher and a nut of the top fastening from an arm. On engines F3R, turn away a nut from the top part of a support, then with the help киянки beat out a through rack.
33. Remove the right arm of the engine/transmission.
34. Attach лебедку to assembly eyes and slightly raise the engine.
35. Turn on (but do not remove) a nut from the back block of communication of a back support of the engine/transmission, then turn on and remove a bolt of a forward part of communication. Turn away an arm of a back support from transmission.
36. Establish forward wheels in position "directly". Working in an impellent compartment, shift back a rubber sealing ring, then turn on эксцентриковый a bolt, крепящий the basis of a steering column to the steering mechanism, and separate a steering column (address to the Head the Suspension bracket and a steering) (address to an accompanying illustration).
On models with a safety pillow it is important not to damage sliding contact of a pillow of safety below a steering wheel. Before removal of a steering column the steering wheel is necessary for blocking by means of the special tool.
37. Turn away four bolts of fastening of a stretcher to the bottom in corners so that it has fallen on 10 mm.
38. Loosen the bolts, fastening two strengthening arms to the bottom.
39. Turn on as far as possible fixing bolts of the steering mechanism. Two strengthening arms are necessary for leaving on a place.
40. Turn away bolts and remove теплоизоляционные boards from below the gear change lever, then unhook a returnable spring from a gear change rod.
41. Turn away a rod back and fix it in this position.
42. Remove the gauge of turns/positions коленвала, disconnect electroconducting and release it from a stretcher.
43. Prepare the cart with wooden брусками to support a stretcher, and check up, that engine/transmission assemblage has been reliably supported. Mechanics Renault use the special cart (Mot. 1040-01) and supporting tools Mot. 1159 and Mot. 1159-02.
44. Turn away bolts of fastening of a stretcher to the bottom, noticing a site распорных linings and washers. Do not forget to remove bolts of fastening of a tube of the steering mechanism with the amplifier to a stretcher.
45. Turn away bolts of the top fastening of a rack of a forward suspension bracket from towers.
46. Lift a car body, then release a manual brake and move the car back. Then lower the car on the earth and cock a manual brake.
47. Ask the assistant to move the bottom parts of racks of a suspension bracket outside, simultaneously releasing power shafts from transmission. Tie up power shafts.
48. Be once again convinced that all components which can interfere with removal of assemblage of the engine/transmission, have been removed or separated. Remove assemblage from a stretcher.