|
|
1. The fuel filter is from below the car, before a fuel tank (address to an accompanying illustration). Before to start to work, wash up the filter. Also before separation connecting муфт, accurately wipe them to minimise dirt hit in fuel system. |
2. For depressurization of fuel system, disconnect hoses from the fuel filter. Disconnect both hoses, marking a correct arrangement of sealing rings, then закупорьте the ends of hoses to minimise fuel loss.
3. Loosen the tightening the screw, then remove the filter, marking its correct installation. The arrow on the filter should specify in a direction of a stream of fuel.
4. Establish the new filter. Be convinced that the arrow specifies in a direction of a stream of fuel, then reliably tighten a coupling bolt.
5. Be convinced that sealing rings are at a stop, and connect hoses to the fuel filter.
6. Start the engine and check up the filter on presence of leak of fuel. |
