|
1. Pass on the car small distance to warm up transmission to normal working temperature.
2. Park the car out of the blue, then switch off ignition and cock a manual brake. Поддомкратьте a forward part of the car and reliably establish it on axial props. Pay attention that at filling and check of level of a liquid, the car should stand out of the blue. Turn away screws of fastening and remove engine/transmission protection.
3. Place the suitable container under transmission. Turn away a drain stopper from the pallet of transmission and allow liquids to flow down completely.
The prevention: Be cautious not to spill a hot liquid on itself.
4. Clear all metal particles from a magnetic insert of a drain stopper. A sealing washer it is necessary to change every time at oil replacement.
5. After all liquid will flow down, clear a carving of a drain stopper and картер transmissions. Before stopper installation replace the sealing.
6. Lower the car on the earth, then fill transmission by the type specified in Specifications and quantity of a liquid.
7. Check up level трансмиссионной liquids. |
