|
1. Merge a liquid the maintenance of the fuel filter.
2. Disconnect a socket of electroconducting from a filter head.
3. Disconnect hoses of giving of fuel from the top part of assemblage of the filter and закупорьте connecting муфты not to admit hit of a dirt and to minimise penetration of air into system.
4. Two types of filters — Lucas or Bosch are established. Filters Lucas have the separate filtering element established in the case of the filter.
For the best access turn away a nut, fastening a filter head to a body, and replace filtering element on a workbench.
Turn away a coupling bolt in the top part of a head of the filter and accurately remove the filter case. Note an arrangement various consolidations — on filter Lucas, the coupling bolt has sealing rings above and below a filter head while on filters Bosch there is only one consolidation.
5. Pay attention to correct installation and remove filtering element from the filter, then clear the case, using pure (without pile) rags. Remove all sealing rings.
6. At assemblage grease new epiploons with pure diesel fuel. Be convinced that the drain crane is reliably clamped and establish a new filtering element. Watch correctly to establish new sealing rings. Fill the filter case with pure diesel fuel and accurately tighten it to a filter head.
7. Connect hoses of giving of fuel to the filter, then connect electroconducting of heating of fuel.
8. Pump over fuel system as it is described in the Head of the Power supply system, release. |
