Reno Megan, Stsenik
+ Cars of mark Renault Megane
+ Maintenance service
+ Engine repair
+ System of cooling, heating
+ Power supply systems, release
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
- Body
Body and bottom service
Care of an upholstery and rugs
Restoration of insignificant damages of a body
Considerable damages of a body - restoration
Removal and installation of a forward bumper
Removal and installation of a back bumper
Removal, installation and cowl adjustment
Removal and installation of a rope of the lock of a cowl
Removal and installation of the lock of a cowl
Removal and door installation
Removal and installation of the panel of furnish of doors
Removal and installation of the handle of a door and lock components
Removal and installation of glass of a door window and window lifterа
Removal and installation of a cover of a luggage carrier
Removal and installation of components of the lock of a cover of a luggage carrier
Removal and installation of a door of a luggage compartment
Removal and installation of components of the lock of a back door
Removal and installation of components of system of the uniform lock
Removal and installation of components electric window lifterа
Removal and installation of external mirrors and the connected components
The wind and back has flown down - the general information
The top hatch - the general information
Removal and installation of external elements кузовной furnish
Removal and installation of seats
System of a tension of seat belts of forward seats - the general information
Removal and installation of components of seat belts
Removal and installation of elements of internal furnish of salon
Removal and installation of the central console
Removal and installation of assemblage of the panel of devices
Control кузовные the sizes
+ Onboard electric equipment
+ Electric equipment schemes
|
Removal and installation of external mirrors and the connected components
Mirror with a manual drive
ALL MODELS EXCEPT SCENIC
|
|
|
1. Accurately disconnect the top part of the panel of furnish of a mirror from a door, then release the panel of furnish from the lever of adjustment and remove it from a door.
2. Remove consolidation from the adjustment lever.
3. Wring out a screw-driver a cover and a lining, then turn away fixing nuts and remove a mirror from a door. Remove a rubber sealant which is established between a door and a mirror; if consolidation is damaged, replace it.
4. Make installation upside-down. |
|
MODELS SCENIC
|
|
|
1. Turn away the panel of furnish of an external mirror from a forward part of a door.
2. Disconnect a cover established on the panel of furnish of a door, below a mirror (address to an accompanying illustration). Remove a rubber cover on the adjusting handle, then, working through a doorway, turn on tightening the screw on the management case. Press blocking uvula with a side of the case of management to release ropes, then take them.
3. Turn away three fixing nuts and remove a mirror from a door. Where is available, remove a rubber sealant which is established between a door and a mirror.
4. Make installation upside-down. |
|
Mirror with an electric drive
ALL MODELS EXCEPT SCENIC
|
|
|
1. Accurately disconnect the top part of the panel of furnish of a mirror and remove it from a door.
|
|
2. Remove isolating polyfoam and disconnect a socket of electroconducting of the motor (address to an accompanying illustration). |
|
|
3a. Wring out a screw-driver a cover and a lining. |
|
|
3b. Then turn away fixing nuts. |
|
|
3с. Cнимите a mirror from a door. Remove a rubber sealant which is established between a door and a mirror; if consolidation is damaged, replace it (address to illustrations). |
4. Make installation upside-down. |
|
MODELS SCENIC
|
|
|
1. Disconnect the panel of furnish of an external mirror from a forward part of a door.
2. Disconnect a cover established on the panel of furnish of a door, below a mirror.
3. Working through a doorway, remove two скобы, fastening the case of management of a mirror to the furnish panel. Remove the case of management and disconnect electroconducting sockets.
4. Turn away three fixing nuts and remove a mirror from a door. Where is available, remove a rubber sealant which is established between a door and a mirror.
5. Make installation upside-down. |
|
Mirror glass
|
|
|
|
1. Completely incline the top part of glass of a mirror and insert a wide wooden wedge between glass of a mirror and the casing basis. Accurately wring out a screw-driver glass from the motor/regulator (address to an accompanying illustration). Show the big care at glass removal; do not make excessive effort as glass easily breaks. |
|
|
2. Remove glass from a mirror where it is necessary, disconnect electroconducting from a mirror (address to an accompanying illustration). |
3. At installation connect electroconducting (where it is necessary) and fix скобами glass on the motor/regulator. |
|
The mirror switch
|
|
