Renault Megane, Scenic

Since 1996 of release

Repair and car operation

Removal and installation of the handle of a door and lock components

THE INTERNAL HANDLE OF THE DOOR-LOCK

REMOVAL

1. Turn away the fastening screw, крепящий the handle to a door, then separate assemblage of the handle from draught and remove it from the car (address to an accompanying illustration).

THE EXTERNAL HANDLE OF THE LOCK OF THE FORWARD DOOR

REMOVAL

1. Remove the panel of furnish of a door as Removal and installation of the panel of furnish of doors is described in Section. 2a. Remove ударогасящую the panel from a door. 2b. On models of the Compartment and Scenic the panel fastens screws, and on all the others - скобами - address to illustrations). 3a. Turn away fixing nuts. 4b. Remove the external handle from a door.

THE CYLINDER OF THE LOCK OF THE FORWARD DOOR

REMOVAL

1. Remove the panel of furnish of a door as Removal and installation of the panel of furnish of doors is described in Section. 2. Remove ударогасящую the panel from a door. On models of the Compartment and Scenic the panel fastens screws, and on all the others - скобами. 3a. Turn away fastening screws (the Hatch-back and the Sedan). 3b. Remove an anticreeping overlay (the Hatch-back and the Sedan) from lock assemblage (address to illustrations). 3c. Turn away screws fastenings (Compartment). 3d. Remove an anticreeping arm (Compartment) from lock assemblage (address to illustrations). 4a. Release fixing скобу, having turned it on 90 °. 4b. Then remove the cylinder of the lock and скобу from a door (address to illustrations).

ASSEMBLAGE OF THE LOCK OF THE FORWARD DOOR

REMOVAL

1. Remove the lock cylinder as it is described earlier in this Section. 2. Separate draught of assemblage of the lock from the external handle, then release draught of the internal handle from directing on a door (address to an accompanying illustration). 3a. Turn away screws of fastening of the lock. 3b. Remove assemblage of the lock from a door, having disconnected a socket of electroconducting from the activator of the uniform lock (where is available) (address to illustrations).

THE EXTERNAL HANDLE OF THE BACK DOOR

REMOVAL

1. Remove the panel of furnish of a door as Removal and installation of the panel of furnish of doors is described in Section. 2. Wring out a screw-driver rubber covers from a door to get access to fixing nuts (address to an accompanying illustration). 3. Separate draught from the handle, then turn away fixing nuts with remove the handle from a door.

ASSEMBLAGE OF THE LOCK OF THE BACK DOOR

REMOVAL

1. Remove the external handle as it is described above. 2. Disconnect the internal button of the lock from a door, then release draught from the button and remove assemblage from a door (address to an accompanying illustration). 3. Remove glass of a back door as Removal and installation of glass of a door window and window lifterа is described in Section. 4. Release draught of the internal handle from directing and separate скобы a rope/draught from a door (address to an accompanying illustration). 5a. Turn away fastening screws. 5b. Cнимите assemblage of the lock from a door, having disconnected an electroconducting socket (it is shown by an arrow) from the activator of the uniform lock (where is available) (address to illustrations).

INSTALLATION

1. Make installation upside-down. Before installation of the panel of furnish, check up functioning of the lock and handles.