|
1. Uncover the tank and finish level of a liquid to the maximum label. The liquid type is specified in Section the routine maintenance Schedule in the beginning of the given Management.
2. Some times slowly move the steering mechanism from one extreme position to another (the engine is muffled) to remove from it air, then add a liquid in the tank. Repeat this procedure while liquid level in the tank does not cease to go down.
3. Start the engine. Again slowly move the steering mechanism from one extreme position to another to remove remained air. Repeat this procedure while in the tank vials will not cease to appear.
4. If at steering wheel rotation in hydrowire tubes uncharacteristic noise is audible, in system still there was air. Check up it, having turned wheels in position "directly" and having switched off the engine. If liquid level in the tank raises, the further prorolling is necessary.
5. Upon termination of prorolling muffle the engine, allow to system to cool down and be convinced that liquid level is on the maximum label of the tank. If it is necessary, add a liquid in the tank. |
