Renault Megane, Scenic

Since 1996 of release

Repair and car operation

Removal and installation of a pedal of a brake

MODELS WITH Manual transmission

REMOVAL

1. Remove a coupling pedal as Coupling is described in the Head.

2. Pull out fixing скобу and remove a pin of a plug of a pusher, крепящий a bar-pusher of the block of the vacuum amplifier to a pedal (address to an illustration).

3. Put forward a rotary axis of a pedal from working position and deduce a pedal of a brake from under the instrument panel together with assembly plugs and распорной a lining.
4. Examine a pedal on presence of damages and deterioration signs, giving particular attention шарнирным to plugs, and replace the worn out components.

MODELS WITH AUTOMATIC TRANSMISSION

REMOVAL

1. Working in salon, remove the bottom cover of the instrument panel (where is available) to get access to assemblage of a pedal of coupling. Turn away a nut of a rotary axis of a pedal, then remove a pedal as it is described in paragraphs 2-4 above.

MODELS WITH Manual transmission

INSTALLATION

1. Put on working surfaces of a pedal, распорной a lining and plugs a quantity of universal greasing. Insert распорную a lining into a pedal and establish plugs flanges more close to external edge. Put also greasing on a plug of a pusher of the amplifier and its pin.
2. Deduce pedal assemblage into position under the panel, having connected it to an amplifier pusher, then push a pedal axis into place.
3. Level a pedal with a bar-pusher and insert a pin of a plug of a pusher. Attach a pin скобой.
4. Check up action of a pedal of a brake, then establish a coupling pedal as Coupling is described in the Head.

MODELS WITH AUTOMATIC TRANSMISSION

INSTALLATION

1. Establish a pedal as it is described above, then reliably tighten a nut of a rotary axis. Check up action of a pedal of a brake, having made on the car a short trip.