Renault Megane, Scenic

Since 1996 of release

Repair and car operation

Reno Megan, Stsenik
+ Cars of mark Renault Megane
+ Maintenance service
+ Engine repair
+ System of cooling, heating
+ Power supply systems, release
- Engine electric equipment
   - Charge and start systems
      Short circuit search
      Test and accumulator gymnastics
      Removal and accumulator installation
      Test of system of a charge
      Removal, installation and tension drive a generator belt
      Removal and generator installation
      Check and generator partition
      Check of serviceability of system of start
      Removal and starter installation
      Test and starter partition
      Removal and installation of the lock of ignition
      Removal and installation of the switch of a control lamp of pressure of oil
      Removal and installation of the gauge of level of oil
   + Ignition system - petrol models
   + System of preheat of the diesel engine
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Electric equipment schemes

Removal and installation of the gauge of level of oil


1. On all engines except К7М, the gauge of level of oil is on a forward part of the block of cylinders, below the oil filter (address to an accompanying illustration). On engine K7M it is on a back part of the block of cylinders, below collectors.

2. Cock a manual brake, then поддомкратьте a forward part of the car and establish it on axial props.
3. Disconnect electroconducting from the gauge.

4a. Turn away the gauge from the block of cylinders.

4b. Cнимите a sealing washer (address to illustrations).


1. Examine a sealing washer on signs of damages and if it is necessary replace it.
2. Establish the gauge together with a washer and reliably tighten it. Connect an electroconducting socket.