Renault Megane, Scenic

Since 1996 of release

Repair and car operation



Reno Megan, Stsenik
+ Cars of mark Renault Megane
+ Maintenance service
+ Engine repair
+ System of cooling, heating
+ Power supply systems, release
- Engine electric equipment
   - Charge and start systems
      Short circuit search
      Test and accumulator gymnastics
      Removal and accumulator installation
      Test of system of a charge
      Removal, installation and tension drive a generator belt
      Removal and generator installation
      Check and generator partition
      Check of serviceability of system of start
      Removal and starter installation
      Test and starter partition
      Removal and installation of the lock of ignition
      Removal and installation of the switch of a control lamp of pressure of oil
      Removal and installation of the gauge of level of oil
   + Ignition system - petrol models
   + System of preheat of the diesel engine
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Electric equipment schemes
3bf7a351




Removal and installation of the lock of ignition

 REMOVAL

1. Disconnect a cable of weight from the battery.

If the radio tape recorder in your car is coded before to disconnect the battery, be convinced that you know a code.

2. Remove a steering wheel and casings of a steering column as it is described in the Head the Suspension bracket and a steering.
3. Disconnect a socket of electroconducting from the ignition lock.
4. Turn on and remove a fixing bolt of the lock of ignition.
5. Insert the ignition key and turn it in position “3”.
6. Press lateral clips and remove the ignition lock together with electroconducting.


 INSTALLATION

1. Make installation in return sequence. Be convinced that electroconducting is correctly laid.