Renault Megane, Scenic

Since 1996 of release

Repair and car operation

Removal and installation of assemblage of the lever of a choice of a mode of movement

Components of a rope and the lever of switching of a mode of movement

1 — the Handle 2 — the Screw 3 — the Top cover	4 — the Bottom cover 5 — Skoba

REMOVAL

1. Cock a manual brake, then поддомкратьте a forward part of the car and establish it on axial props. Remove термоизоляционные guards to get access to assemblage of the mechanism of a choice of transfer. 2. Turn away the small screw and remove the handle from the gear change lever, then remove the central console (the Head the Body) and disconnect conducting (address to an illustration above). 3. Remove assemblage of the air filter as it is described in the Head of the Power supply system, release. 4. Disconnect a rope from the transmission lever, having let out скобы and having removed a tip from the hinge (address to an accompanying illustration). 5. Turn away two bolts and remove from lever assemblage the top cover. 6. Working under the car, turn away a nut, fastening lever assemblage to a floor. 7. Turn away a bolt, крепящий a rope of switching of a mode of movement to the bottom, and remove assemblage from under the car. 8. Separate a rope from lever assemblage (address to Section Removal and installation of a rope of switching of a mode of movement).

INSTALLATION

1. Make installation upside-down, paying attention to the following: a) Before installation, put on working surfaces of the mechanism of the lever a small amount of universal greasing. b) In summary, check up and adjust work of the lever of a choice of a mode of movement as it is described in Section Adjustment of length of a rope of switching of a mode of movement.