Renault Megane, Scenic

Since 1996 of release

Repair and car operation

Reno Megan, Stsenik
+ Cars of mark Renault Megane
+ Maintenance service
+ Engine repair
+ System of cooling, heating
+ Power supply systems, release
+ Engine electric equipment
+ Coupling
- Transmission
   + Manual box of a gear change (Manual transmission)
   - Automatic transmission
      Filter replacement трансмиссионной liquids
      Adjustment of length of a rope of switching of a mode of movement
      Removal and installation of assemblage of the lever of a choice of a mode of movement
      Removal and installation of a rope of switching of a mode of movement
      Removal and installation of a drive of a speedometer
      Replacement of epiploons
      Removal and cooler installation трансмиссионной liquids
      Removal and installation of electronic components of automatic transmission
      Removal and installation of automatic transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Electric equipment schemes

Filter replacement трансмиссионной liquids


1. The filter should be replaced at each change трансмиссионной liquids.
2. Merge трансмиссионную a liquid as Maintenance service is described in the Head.
3. Disconnect a broad tank of a cooling liquid and displace it aside.
4. Remove assemblage of the air filter as it is described in the Head of the Power supply system, release.
5. Cock a manual brake, then поддомкратьте a forward part of the car and establish it on axial props. Remove the left wheel.
6. Remove the loose leaf of an arch of a wheel - it fastens plastic скобами and screws.
7. Prop up transmission, using a jack and a board piece.
8. Turn on and remove bolts, fastening the left support of the engine/transmission to a body.
9. On models with ABS turn away a fixing nut of pump ABS located on the left support of the engine.
10. Raise transmission on a jack to create working space for removal of its pallet.
11. Loosen the both remove bolts and lower the pallet. Remove pallet consolidation.

12. Disconnect the filter from the basis of transmission and remove its lining (address to an accompanying illustration).

13. Remove from an internal part of the pallet magnets, having noted their arrangement, and remove with all of them metal particles. Particles should be very small; presence of notable metal crumbs specifies in deterioration of components of transmission. Establish magnets into position.
14. Place on the filter a new lining and establish it on transmission. Establish fastening bolts, watching that the lining was not displaced, and tighten their effort resulted in Specifications.
15. Place on the pallet a lining, establish the pallet on transmission and tighten fastening bolts the effort resulted in Specifications.
16. Lower transmission, then establish bolts of the left support of the engine/transmission and tighten their regulated effort of an inhaling.
17. On models with ABS, establish a fixing nut of the pump on the left support of the engine and tighten it.
18. Establish the loose leaf of an arch and a wheel and lower the car on the earth. Tighten wheel bolts the effort resulted in Specifications.
19. Establish the air filter and attach a broad tank.
20. Fill transmission by the type specified in Specifications and quantity of a liquid (address to the Head Maintenance service).