Renault Megane, Scenic

Since 1996 of release

Repair and car operation

Replacement of lamps (lanterns of illumination of salon)

Be guided by Section Replacement of lamps (external lighting devices), paragraph 1.

Lantern of illumination of a forward part of salon and lantern for reading

MODELS WITH THE INCORPORATED BLOCK OF THE LANTERN

REPLACEMENT

1. By means of a flat screw-driver, accurately disconnect a cover of the block of a lantern from the top console. 2. Remove a corresponding lamp. 3. Make installation upside-down.

MODELS WITH SEPARATE LANTERNS

REPLACEMENT

1. By means of a flat screw-driver, accurately remove assemblage of the block of a lantern (address to an accompanying illustration). 2. Turn the holder of a lamp counter-clockwise and remove it from a lantern. Extend a lamp from the holder (address to an accompanying illustration). 3. Make installation upside-down.

Illumination of a back part of salon

REPLACEMENT

1. By means of a flat screw-driver, accurately disconnect рассеиватель, then release a lamp and remove it from the lantern block. 2. Make installation upside-down.

Lamp of illumination of a luggage carrier

REPLACEMENT

1. By means of a flat screw-driver, accurately disconnect the block of a lantern from the panel of furnish and disconnect it from an electroconducting socket (address to an accompanying illustration). 2. Press fixing скобу and release рассеиватель from the lantern block, then remove a lamp (address to an accompanying illustration). 3. Make installation upside-down.

Lamps of illumination of the instrument panel / control lamps

REPLACEMENT

1. Remove the instrument panel as Removal and installation of the instrument panel is described in Section. 2. Turn the corresponding holder of a lamp counter-clockwise and take it from a back part of the panel (address to an accompanying illustration). 3. All lamps are built in in the holders. 4. Establish the holder of a lamp, then - the instrument panel as Removal and installation of the instrument panel is described in Section.

Lamp of illumination of a ware box

REPLACEMENT

1. Open a ware box and replace a lamp as it is described above.

Lamp of the multipurpose display

REPLACEMENT

1. Remove the multipurpose display as Removal and installation of the multipurpose display is described in Section. 2. Turn the holder of a lamp on 90 ° and remove it from the display (address to an accompanying illustration). 3. Make installation in the return to removal an order.

Illumination lamp прикуривателя

REPLACEMENT

1. Remove lighter as Removal and installation прикуривателя is described in Section. 2a. Disconnect a lamp cover. 2b. Extend a lamp from the holder (address to illustrations). 3. Make installation upside-down.

Lamps of illumination of switches

REPLACEMENT

1. All switches are equipped by illumination lamps. On some switches, these lamps can be removed, having turned their holder on 90 °. However some switches are available the built in lamps. Therefore for its replacement it is necessary to replace the switch.